Lê Nguyễn

Danh sách

Tổng số lượt xem trang

Email

Tên

Email *

Thông báo *

What’s Hot

PRO MARKER MAKING

PRO MARKER MAKING SUITE

Groups
Hoàn thành giải pháp nhanh chóng và chính xác
  1. Go to Nesting> Auto Nesting Setup.
  2. From the Algorithm drop-down list, select Nesting ++ Pro
    1. If you set the maximum time for the algorithm to run, the algorithm will keep checking for a better layout solution until the maximum time is reached. In the Timefield, enter the maximum time.
    1. If you want to nest by bundles, from the Groups Options drop-down, select According to Bundles.
    2. If you have bundles in shaders and you have an extra bundle thus causing you to loose space, you can use the Shading Horizontal Groups option. This will cause the last bundle to be nested over the marker width. This will increase the marker efficiency.
    3. Select the Unify Orientation within Bundles checkbox, If you want nest the pieces according to a unique bundle orientation. Each bundle will be place in the opposite direction.
    4. Select the Auto Create Vertical Bump Lines checkbox, if you want to create bump lines that are vertical.
    5. Select the Unlimited Marker Length checkbox, if you do not want the marker length to be restricted according to the Marker Definition settings.
    6. Select the Compaction After Nesting checkbox, if you want to implement compaction after the nesting process has completed.
    7. If you want to run a post nesting process in order to save space especially between smaller pieces, select the Optimize Space for Cutting Checkbox.
    8. Select how you want to run the process, either Define Small Pieces Automatically , meaning the system will automatically re size the area between the pieces
    9. Or
    10. In the Small Pieces Area, field, enter the amount of space you want between pieces.
    11. Click Start to start the nesting process.
    12. Click Set to save the settings so you can use the settings again.
 


Marker : Groups Vertical Horizontal

You can use groups when Nesting when you want to place your pieces in a specific way, either according to bundles, sizes, etc.
There are two types of groups available:
  • Vertical: Allows you to group in a vertical manner, for example according to the sizes, so that you can save room on the cutter.
  • Horizontal: Allows you to group in a horizontal manner, for example if you want to group by shades of the cloth and you want to place pieces that require darker/lighter cloth in the correct places.
  • In the Marker, go to Nesting > Auto Nesting Setup:
  • The Auto Nesting dialog appears: 
    1. From the Alogrithm drop-down list, select the type of algoithm you would like to use.
      Note: You will only see algorthms for which you have licenses for.
    2. In the Time field, enter the amount of time you want the nesting to take place.
    3. From the Group Options drop-down list, select how you want to group the pieces, for example select According to Bundles.
    4. Select the Vertical Groups checkbox.
    5. Select the Additional Mixing checkbox if you have smaller pieces. This way the smaller pieces will fall into places where there is extra room.
    6. From the Shading (Horizontal Groups) drop-down list, select the number of horizontal groups you want to create. The number is defined according to the number of lines that are between the width of the cloth.
    7. In the Overlap field, enter Small, Medium, or Large to define the type of overlap. For example, if you want a small overlap between the bundles, enter Small.
    8. Click Set, then Start.
      The nesting process begins. The time it takes for the pieces to nest is according to the number you defined in Time.
      Once the nesting is done, the pieces will look like this:



What's New in this Version ? Optitex

What's New in this Version?

The following new features have been released in version O/15:
3D Product Creation Suite Content
Pattern Making Suite Content
Marker Making Suite Content
Cutting Room Optimization Suite Content

Optitex 15.5.551 New Features

The following new features/improvements were implemented in the PDS in version O/15:
Defect ID
Type
Description
Version
Status
PDSD-765
Removed
Removed Seam Corners (Types E,F,G) User interface
O/15.5
Implemented
PDSD-101
Enhancement
Export external contour cut segments in AAMA for leather
O/15.5
Implemented
PDSD-363
Enhancement
New type of HP-GL units
O/15.5
Implemented
PDSD-391
Enhancement
Improvement of "Angle of rotation" dialog ( UI )
O/15.5
Implemented
PDSD-565
New Feature
Draft-  New arc tool "center, start and end"
O/15.5
Implemented
PDSD-603
Enhancement
"Tool/Layer" field and Leather AAMA export format.
O/15.5
Implemented
PDSD-530
Enhancement
Multi move to move only visible object
O/15.5
Implemented
PDSD-161
New Feature
Measure from specific distance from an element/point.
O/15.5
Implemented
PDSD-159
New Feature
Slash by pivots tool = "Remove excess"
O/15.5
Implemented
PDSD-354
Enhancement
Stacking - Can now restore the stack for all pieces
O/15.5
Implemented
PDSD-355
Enhancement
Now supports area units
O/15.5
Implemented
PDSD-356
Enhancement
"Remove Base Line Grading" was recovered when stacking.
O/15.5
Implemented
PDSD-414
Enhancement
Include outside V notches in piece area.
O/15.5
Implemented
PDSD-448
Enhancement
Report-  Add total area for each material in Excel report
O/15.5
Implemented
PDSD-465
Enhancement
Point to point fold on more than one piece
O/15.5
Implemented
PDSD-236
Enhancement
Point location dialog - Add an option to change ".ini" file to define default to be "From snap point"
O/15.5
Implemented
PDSD-349
New Feature
New Menu - A new option O/Cloud has been added to the Menu bar to allow uploading images to O/Cloud Admin
O/15.3
Implemented
PDSD-308
New Feature
Drag - Ability to flip and rotate internals while dragging.
O/15.3
Implemented
PDSD-235
Enhancement
Rotate Segment - You can now snap segments or rotate by angle.
O/15.3
Implemented
PDSD-232
Enhancement
Drafting - You can now lock the drafting path on diagonal or perpendicular directions.
O/15.3
Implemented
PDSD-359
New Feature
Seams - New ability to change the seam allowance for multiple seams at the same time
O/15.3
Implemented
PDSD-219
Enhancement
Map Zone - Making changes to extracted pieces will not effect the base ( the map).
O/15.3
Implemented
PDSD-392
Enhancement
Seams - Can now create a rounded seam corner
O/15.3
Implemented
PDSD-115
Enhancement
Stitches - Stitches for pieces without Style Sets are now displayed.
O/15.3
Implemented
PDSD-313
Enhancement
Seams - Do not draw or plot seam when seam is set to 0.
O/15.3
Implemented
PDSD-294
Enhancement
Darts - "Reshape dart contour" (new way to close dart).
O/15.3
Implemented
PDSD-212
Enhancement
Contour - Add multi points or notches on Contour.
O/15.3
Implemented
PDSD-71
Enhancement
Guide Lines - An Apply button has been added to the Guide Linea dialog.
O/15.3
Implemented
PDSD-67
Enhancement
Export - L notches are exported as V notches to DXF.
O/15.3
Implemented
PDSD-378
New Feature
Dart/Pleat - Can now swap segments.
O/15.3
Implemented
PDSD-341
Enhancement
Plot Preview - Pleat and dart overlap marks no longer look like  notches.
O/15.3
Implemented
PDSD-155
Enhancement
Reseam - Function in cut mode changed seam allowance.
O/15.3
Implemented
PDSD-234
New Feature
Drag - Ability to flip and rotate ad flip pieces while dragging.
O/15.3
Implemented
PDSD-175
Improvement
Dart-Pleat - An indicator has been added for the closing length in the Marker.
O/15.2
Implemented
PDSD-284
Improvement
Setup - Plugins have been added to the main setup.
O/15.2
Implemented
PDSD-59
Improvement
Seams - Can now see when an Arc Seam has been edited in the Edit Arc dialog.
O/15.2
Implemented
PDSD-147
Improvement
Pleats - Now displays the closing length in the 2D pattern of a closed section.
O/15.2
Implemented
PDSD-81
Improvement
Seam - "Move point" dialog has been added when creating seams.
O/15.2
Implemented
PDSD-26
Improvement
Measurement Chart - A new dialog has been added to easily copy and paste grading when creating variation grading.
O/15.2
Implemented
PDSD-173
Improvement
Dart Pleat - Can now define a closing length in the Dart-Pleat dialog.
O/15.2
Implemented
PDSD-20
Improvement
UI - now support HiDPI icons.
O/15.2
Implemented
21493
New Feature
A new shortcut/hotkey has been implemented for grade points and curve points. NumPad1 for grading, NumPad2 for curve attributes.
O/15
Implemented
22879
Improvement
You can now lock/unlock guidelines.
O/15
Implemented
23924
Improvement
When reporting to Excel, if piece was set to “Fill by Material” the piece color will be the same as the material color.
O/15
Implemented
24104
New Feature
When moving a point using the Move Point Tool, the Segment Length now appears interactively next to the cursor.
O/15
Implemented
25395
Improvement
A new scale mode "shrinkage  factor" has been implemented to compensate for the amount of growth in pieces to match the actual shrinkage amount.
O/15
Implemented
25426
New Tool
The full segment length is now displayed during drafting.
O/15
Implemented
25766
New Feature
Can now use the SDK to plug into PDS’s database.
O/15
Implemented
25875
New Feature
A new tool has been added in the Grading menu: "select grade points"
O/15
Implemented
25915
Minor Improvement
The Grading Table dialog has been improved.
O/15
Implemented
26354
Minor Improvement
Two new buttons have been added to the Collaborate dialog: “New Folder” and “Browse for Folder”.
O/15
Implemented
26398
Minor Improvement
A "Remember me" option has been added to the Login dialog in Collaborate so you do not have to enter your login details each time.
O/15
Implemented
26553
Minor Improvement
If a layer is a variant you will not be able to publish during collaboration.
O/15
Implemented
26613
Minor Improvement
When publishing, a confirmation message now displays.
O/15
Implemented
26625
Minor Improvement
The last selected file type is now saved in open 3D models.
O/15
Implemented
26627
Minor Improvement
If the file includes grading, “By Piece Name” is now available in Preferences > Colors > Setting> Contour Line.
O/15
Implemented
26718
Minor Improvement
All content of the CollaborateTemp folder now behaves like the FSCreate.log i.e., user login is deleted after logging  in.
O/15
Implemented
26735
Enhancement
Quick partial selection of pieces in Style Sets is now available.
O/15
Implemented
26768
Minor Improvement
You can now choose a background color for the Gaps in the Fabric Pattern dialog.
O/15
Implemented
26814
Minor Improvement
You will now receive an alert when removing pieces from a Style set.
O/15
Implemented
26266
Change Request
A user interface for HP-GL units in plotter setting dialog box was added.
O/15
Implemented
26267
Change Request
When generating Gerber cut files, you can now select metric or English units.
O/15
Implemented
26724
New Feature
You can now save a file as read only.
O/15
Implemented
26981
Change Request
You can now plot all plotting pages in one command.
O/15
Implemented
27004
Enhancement
You can now save plot files without an extension.
O/15
Implemented
27011
Enhancement
Pleat in 3D-2D support
O/15
Implemented
28264
Minor Improvement
New registry key "UseOldFormats" in 3DView/Export section.
O/15
Implemented
28342
Minor Improvement
New Optitex logo implemented.
O/15
Implemented


Copyright 2014 LÊ NGUYỄN