Edit Pattern Design

 Lê Nguyễn xin hướng dẫn các bạn một số cách khắc phục error khi gặp sự cố về cách mở rập Lectra , Optitex hay DXF mà đôi khi rất đơn giản nhưng lại không biết cách khắc phục

Edit name Pattern Design

Đây là một error sửa rất đơn giảm

Khi các bạn nhận được 1 file DXF của khách hàng gửi mà kèm ngôn ngữ Korea , China and .... mà không phải  English sẽ không thể mở được và gặp lỗi như hình bên dưới

Đề sửa error như vậy chúng ta cần phải kiểm tra file rập khách hàng gửi là file gì và vấn đề lỗi phát sinh từ đâu để khắc phục .

Đối với lỗi trên thì cách sửa đơn giản nhất là chỉnh sửa lại tên file , chúng ta bỏ đi tiếng Korea và để lại những ký tự tiếng English . Bởi vì windwos và phần mềm của chúng là là English

Thành quả sẽ được như sau 

Chúc tất cả các bạn khắc phục thành công

Mọi thông tin chi tiết khi gặp sự cố cần giúp đỡ . Vui lòng gửi đến email Khuenguyen15@gmail.com hoặc lenguyen0515@gmail.com để được giúp đỡ .

Chúng tôi sẽ trả lời và hướng dẫn cách khắc phục nhanh nhất .

Dịch vụ in/vẽ sơ đồ  gia công .

Nhận cài đặt - cung cấp phần mềm ngành may .

 Gerber  - Lectra - Optitex , Stylecad , Richpeac ...version New

Skype :  sacom_2001

Email : khuenguyen15@gmail.com

How to Draw Female Figure?

It is understood by canon provided the human figure an orientation code, using mathematical formulas, provides the ideal proportions of the human body, dividing it into sectors that are called modules that facilitate the distribution of membership and calculating the proportions of female body in this case

The classical canon: the figure we call “academic” derives from classical Greco-Roman canon. It is a standardized view of the body does not correspond to any particular individual but exemplifies the general idea of women body.  The main utility of a classic canon is to be constructed from references involving the divisions between modules. This module system also allows referencing other significant points that are helpful to understand the anatomy and facilitate the representation of the figure, as well as locate references in width to check the most important districts.

The more slender canon: The canon of eight heads is valid for the study of drawing in general, but not the right to represent the fashion plate. In schools fashion designersalumnus work with the canon of eight heads and media, which responds to two reasons: the first is to give more slender body (stylizing the figure as exaggerated many times so that the sketch is extremely elegant and slender). The female figurine is almost always depicted with high heels. The prototype drawing body fashion shows higher than the Greco- Roman classical canon.

HEAD AS A MEASURE: The size of the head plays a key role in the construceight head female fashiontion of the female figure in a proportionate; it serves as a basic measuring module. No wonder the total height of the figure of an adult is eight times this dimension. To draw a correctly proportioned figure, the head height is measured. A vertical line is drawn and the measure is marked on the line eight times or nine if you want to achieve a well stylized figure. Since these vertical horizontal lines that allow us to build the female figure is projected.

The modules show body measurements: If we build a female figure eight and a half heads using the module system will observe some anatomical similarities that may be useful to us to draw:

the first module is the size of the head;

the second indicates the armpit and the birth of the breasts; the third match elbows and navel;

the fourth defines the pubis,

the fifth the maximum length of the arm;

sixth the knees;

the eighth position ankles.

The lower extremities can measure four to five modules.

The fashion plate:This is the graphical representation of the model hanger dressing creations. It is constructed from a line drawing that enhances the pose and the most prominent profile curves of figure. Here is the figurine, which can be used again as a template for different creations base. The figurine should show a vivid expression and submit a satisfactory online, offering all the information needed to understand the pose and anatomy model. To get an interesting line, the designer must combine different stroke widths. In this sense, we can use pen tilt to modulate the line, or alter the pressure and angle of the brush. A useful exercise is to try to make with one stroke the figurine to giveflexibility to the sketch.

Modaris V7R2SP7 and Diamino V6R2SP4 install very good windows 64bit

Modaris V7R2SP7 and Diamino V6R2SP4 install very good windows 64bit

Import and Export Lectra

https://plus.google.com/u/0/109510157949848011477/posts/aZcaESFUtGt?pid=6281564800524498754&oid=109510157949848011477