PRO MARKER MAKING

PRO MARKER MAKING SUITE

Groups

Hoàn thành giải pháp nhanh chóng và chính xác

1. Go to Nesting> Auto Nesting Setup.
2. From the Algorithm drop-down list, select Nesting ++ Pro
3. 3. If you set the maximum time for the algorithm to run, the algorithm will keep checking for a better layout solution until the maximum time is reached. In the Timefield, enter the maximum time.
   4. If you want to nest by bundles, from the Groups Options drop-down, select According to Bundles.
   5. If you have bundles in shaders and you have an extra bundle thus causing you to loose space, you can use the Shading Horizontal Groups option. This will cause the last bundle to be nested over the marker width. This will increase the marker efficiency.
   6. Select the Unify Orientation within Bundles checkbox, If you want nest the pieces according to a unique bundle orientation. Each bundle will be place in the opposite direction.
   7. Select the Auto Create Vertical Bump Lines checkbox, if you want to create bump lines that are vertical.
   8. Select the Unlimited Marker Length checkbox, if you do not want the marker length to be restricted according to the Marker Definition settings.
   9. Select the Compaction After Nesting checkbox, if you want to implement compaction after the nesting process has completed.
   10. If you want to run a post nesting process in order to save space especially between smaller pieces, select the Optimize Space for Cutting Checkbox.
   11. Select how you want to run the process, either Define Small Pieces Automatically , meaning the system will automatically re size the area between the pieces
   12. Or
   13. In the Small Pieces Area, field, enter the amount of space you want between pieces.
   14. Click Start to start the nesting process.
   15. Click Set to save the settings so you can use the settings again.